Building the H.M.S. Bounty

Step By Step


Step 7:
We still want to work carefully and use our digital calipers through this step. Make sure you use plenty of resin to fill in the gaps and get a super strong hold.

Select images for a larger view

Step 8:
Another pretty basic step. I think AL is trying to get you warmed up through the first part of building the hull so that you can get warmed up for the complexities later on. Be liberal with the resin here and use clamps to get a good tight fit.

Select images for a larger view

Step 9:
This step requires a little study because the parts don't just stick on at a 90 degree angle, you need to tilt the in a little to prevent sanding them to death. Study the overhead plan and some of the pictures in the book. Click on the picture below to see some additional references

Select images for a larger view





Next Page